Dome-shaped medical warmer

A product allows users to lie under the dome-shaped heating heater and enjoy heat. This device is used to relieve muscle pain through heat generated from the heater.

  • #Dome form

  • #Relax muscle pain

  • #Thermal heater

cdm2009_1

Medical warmer used to relieve muscle pain.

cdm2009_2

Stable arch-shaped structure.

cdm2009_3

Intuitive and easy to use.

Product Specification

  • Product Name

    Cheongung Ⅲ

  • Item Name

    Medical warmer

  • Model Name

    CDM-2009B

  • Manufacturing License Number

    No. 4027

  • Manufacturing Certification Number

    Manufacturing certification No. 15-1179

  • Purpose of Use

    Relieving muscle pain

  • Rated Voltage / Power Consumption

    AC 220V, 60Hz / 365W

  • Set Temperature

    25℃~70℃

  • Set up Time

    1 to 8 hours (However, power is turned off when 0 hours is set)

  • External Dimension

    1,000x600x510mm

  • Time to Arrive the Maximum Temperature

    One hour

  • Weight / Packaging Unit

    25Kg / Cheongung's packaging unit

  • Manufacturing Serial Number and Date of Manufacture

    Entering in the main body of product

  • Protection Type and Degree of Protection against Electrical Impact

    1 grade device, B-type mounting part

  • Safety Device

    Prevent overheating of the heating unit by bimetal within the range of 90°C ±5°C

  • Storage Method

    N/A

  • Use-by Date

    N/A

How to Use

Check Point !

Make sure there is no damage before using the product.

Check that connecting the power plug in the outlet (2.2 v ac) of the appropriate rating.

Connect the power cable to the power cable connection at the rear of the product

Put the main power switch on the back of the product and apply power to the product.

Press the power button on the control panel at the top of the product to operate the product. (The initial setting is 60℃, 5 hours.)

Set the desired temperature and time with the Temperature and Time Adjustment buttons.

Press the L.LED button to decide whether to use it or not.

The device stops operating when the set time elapses and it is marked 0 on the time of the regulator display window.

To stop using it while in use, press and hold the power button of the regulator to stop operating the product and turn off the main power button of the main body.

Example of use

cdm2009-ex1
cdm-2009_ex2

Warranty period

1. After a quality inspection process, this product is being shipped.

2. In the event of a failure in normal condition, it will be repaired free of charge for five years from the date of purchase in accordance with the Consumer Protection Act and the A/S policy of the headquarters.

3. In case of failure, refer to the store you purchased or contact the headquarters' A/S counseling office.
※After the guarantee period, it will be paid for.

4. However, even during the warranty period, it will be paid for in the following cases.
- Abnormal symptoms or failure, or failure caused by repair by a person other than our service engineer.
- When a user arbitrarily disassembles, assembles, or modifies a failure, a failure due to an abnormal power supply or a failure due to a defect in the connection mechanism
- Failure caused by natural disasters (fire, heat damage, flood damage, gas damage, earthquake, storm damage, lightning, etc.)

※This product is "Medical Appliance" and please read and use "Precautions" and "How to Use" carefully.

※ The appearance, specifications, etc. of the product can be changed without prior notice to improve the product.

Ad review confirmation: Deliberation No. 12021-I10-04-0273 (valid period 24.08.24)